Skip to main content
Contact us
    0 results available.
    CCTV on pole

    CCTV, Smart Sensors & other devices

    Local councils, the Department of Transport and Main Roads (TMR), and Queensland Police can apply to install the following devices on our overhead infrastructure such as wood poles, concrete poles, or street light columns:

    • CCTV
    • Condition monitoring devices
    • Weather stations
    • Traffic signals
    • Parking sensors
    • Warning lights (Aircraft)
    • Safety beacons.

    This process will involve both an application and an agreement, which you will need to enter with us. This will detail the legal and commercial responsibilities and other contractual obligations and associated costs for your installation on our network.

    Once your design has been accepted and approved by our team and you have a signed agreement, your work can begin.

    If you are an existing customer seeking an approved Accredited Service Provider (ASP) for installation of these various devices, please review our list of installers (PDF 227.9 kb).

    If you are a new customer and would like to enquire about installing your device and Internet of things (IOT) for either short or long term periods, please refer to the process below.

    If you are a member of the public, requests for private installations are not accepted.

    Installation process

    1. 1 Enquiry

      You identify the poles needed for your installation and submit your initial enquiry via our online enquiry form.

    2. 2 Checks

      We'll do some prequalification checks to confirm the pole's suitability for your devices.

    3. 3 Application

      If your devices need power, you must apply for an unmetered supply connection via our Portal. We can help you with your application submission.

    4. 4 Review

      Your application and design will be reviewed by our relevant teams.

    5. 5 Agreement

      We'll establish the relevant agreement with you:

      • Large quantity of devices or long-term/permanent installations - We'll send you a Facilities Access Agreement (FAA), which you must sign and email to facilitiesaccess@energyq.com.au. Application and annual fees will apply.
      • Small quantity of devices or short-term installations - We'll send you a Deed Poll Agreement for each pole, which you must sign and email to facilitiesaccess@energyq.com.au. A FAA is not required, but application and annual fees still apply.
    6. 6 Licence
      Your site licence will be offered and executed by us.
    7. 7 Installation

      You must engage an Accredited Service Provider (ASP) for installation of your devices from one of our approved lists:

    8. 8 Fees

      An application fee and annual fee for each pole site will apply.

    Related links